ABAQUS問題

瀏覽：1984 回答：1

Kinematic *contact pair references a rigid surface that is also included in a general contact definition (which incorporates all analytical rigid surfaces.) this could produce incorrect results. Use penalty contact pair instead of kinematic contact pair.

求大神指點

邀請回答我來回答

全部回答

(1)

默認 最新

復合材料力學-君莫

更改一下你的面面接觸屬性，改為penalty形式

2016年8月2日

評論點贊

沒解決？試試專家一對一服務

換一批

相似問題

查看全部

abaqus警告接觸對相交，應該怎么解決呢？暫無回答
THE SLAVE SURFACES ASSEMBLY_GZM N AND ASSEMBLY_GZM N2 INTERSECT EACH OTHER. THEY ARE PAIRED WITH MASTER SURFACES ASSEMBLY_GZ T N AND ASSEMBLY_GZ T2 THAT ALSO INTERSECT EACH OTHER. IF BOTH PAIRS ARE *C
abaqusSurface from element type c3d10 cannot be used with contact pair in abaqus/explicit Surfac? 暫無回答
Surface from element type c3d10 cannot be used with contact pair in abaqus/explicit Surface from element type c3d10 cannot be used with contact pair in abaqus/explicit Surface from element type c3d10
abaqus做仿真提示的錯誤？ 14個回答
Abaqus中先算螺栓預緊力后算沖擊，如何設置如下： 1. 我是先用general static分析步算螺栓預緊力的，算完之后改成dynamic explicit分析步進行求解，請問這個思路是對的嗎？ 2. 在求解螺栓預緊力的時候我也設置了restart 3. 算完之后的文件如下： 4.然后另存模型，修改分析步為dynamic explicit，刪除load邊界條件，也就是螺栓預緊力，還修改了mo