Abaqus中先算螺栓預緊力后算沖擊，如何設置如下：

1. 我是先用general static分析步算螺栓預緊力的，算完之后改成dynamic explicit分析步進行求解，請問這個思路是對的嗎？

2. 在求解螺栓預緊力的時候我也設置了restart

3. 算完之后的文件如下：

4.然后另存模型，修改分析步為dynamic explicit，刪除load邊界條件，也就是螺栓預緊力，還修改了model attributes和load 模塊里面的predifined filed

4.job里面是這樣設置的：

5.提交計算提示錯誤

The slave surface assembly_part21-1_surf-igbt-base does not exist.

Surface assembly_part21-1_surf-igbt-base not found

Contact pair references surface/node-based surface/analytical rigid surface assembly_part22(dizuo)-1_surf-base-cooler but this surface/node-based surface/analytical rigid surface has not been defined or this surface is defined on the collapsed faces

Contact pair references surface/node-based surface/analytical rigid surface assembly_part1-1_surf-cooler-base but this surface/node-based surface/analytical rigid surface has not been defined or this surface is defined on the collapsed faces

Contact pair references surface/node-based surface/analytical rigid surface assembly_part22(dizuo)-1_surf-base-1 but this surface/node-based surface/analytical rigid surface has not been defined or this surface is defined on the collapsed faces

Contact pair references surface/node-based surface/analytical rigid surface assembly_bolt-1_surf-bolt-base but this surface/node-based surface/analytical rigid surface has not been defined or this surface is defined on the collapsed faces

Contact pair references surface/node-based surface/analytical rigid surface assembly_part22(dizuo)-1_surf-base-2 but this surface/node-based surface/analytical rigid surface has not been defined or this surface is defined on the collapsed faces

Contact pair references surface/node-based surface/analytical rigid surface assembly_bolt-2_surf-bolt-base but this surface/node-based surface/analytical rigid surface has not been defined or this surface is defined on the collapsed faces

Contact pair references surface/node-based surface/analytical rigid surface assembly_part22(dizuo)-1_surf-base-3 but this surface/node-based surface/analytical rigid surface has not been defined or this surface is defined on the collapsed faces

Contact pair references surface/node-based surface/analytical rigid surface assembly_bolt-3_surf-bolt-base but this surface/node-based surface/analytical rigid surface has not been defined or this surface is defined on the collapsed faces

Contact pair references surface/node-based surface/analytical rigid surface assembly_part22(dizuo)-1_surf-base-4 but this surface/node-based surface/analytical rigid surface has not been defined or this surface is defined on the collapsed faces

Contact pair references surface/node-based surface/analytical rigid surface assembly_bolt-4_surf-bolt-base but this surface/node-based surface/analytical rigid surface has not been defined or this surface is defined on the collapsed faces

Contact pair references surface/node-based surface/analytical rigid surface assembly_part22(dizuo)-1_surf-base-5 but this surface/node-based surface/analytical rigid surface has not been defined or this surface is defined on the collapsed faces

Contact pair references surface/node-based surface/analytical rigid surface assembly_bolt-5_surf-bolt-base but this surface/node-based surface/analytical rigid surface has not been defined or this surface is defined on the collapsed faces

Contact pair references surface/node-based surface/analytical rigid surface assembly_part22(dizuo)-1_surf-base-6 but this surface/node-based surface/analytical rigid surface has not been defined or this surface is defined on the collapsed faces

Contact pair references surface/node-based surface/analytical rigid surface assembly_bolt-6_surf-bolt-base but this surface/node-based surface/analytical rigid surface has not been defined or this surface is defined on the collapsed faces

Analysis Input File Processor exited with an error.

該怎么辦呢？我定義接觸了啊，看了一下都沒有問題

求各位大神指點一二，在此拜謝！