node-based surface used with的搜索結果

發布

相關搜索79

Path based tracking cannot be used with analytical rigid master surfaces, the state based tracking algorithm will be used instead.

3297 1

小七_9043 ??? 3年前

問答 ABAQUS接觸問題？

Contact field output is requested for a node-based surface (*SURFACE, TYPE=NODE) spanning multiple instances in an Abaqus/Explicit analysis.

2875 1 2

小亦 ??? 3年前

問答大佬幫忙看看問題出在哪里了，感謝？

under *surface interaction.

3071 1 2

why_0948 ??? 3年前

帖子剛性彈丸對板材的侵徹分析（ABAQUS 6.16幫助文檔第2.1.3節）

因此，必須在球體表面（定義為基于網格單元的面【element-based surface】）和包含板中位于碰撞點半徑20mm范圍內的所有節點的表面（定義為基于網格節點的面【node-based surface】）之間建立接觸關系（contact）。

3540 17 3

墨鬼 ??? 2年前

帖子 Positive normal definition for conventional shell

Positive and negative are also used to designate top and bottom surfaces when specifying offsets of the reference surface from the shell's midsurface.(傳統殼單元的“頂”面是正法線方向的表面，在接觸定義中稱為正(SPOS)面。

2500 17 11

Elbert Q ??? 3年前

Positive normal definition for conventional shell

帖子 FRED如何調用Matlab？

the analysis surface being used.

2193 2

追光ing ??? 3年前

帖子 ABAQUS中隱式和顯式的節點和單元的輸出變量解析

CNAREA Field: yes History: no .fil: no Contact nodal area for each node with active contact forces in general contact, based on area contributions from adjacent surface facets projected to

5003 3 2

李時珍 ??? 2年前

帖子 tcl語言hypermesh二次開發門洞屈曲自動化計算程序 optistruct求解器

1 1 -$temp 1 1 0 0 0 *startnotehistorystate {Moved surfaces into component "base"}*createmark surfaces 1 4*movemark surfaces 1 "base"*endnotehistorystate {Moved surfaces

2907 1 7

劉寶龍 ??? 3年前

tcl語言hypermesh二次開發門洞屈曲自動化計算程序 optistruct求解器

帖子沃爾沃XC90空氣動力學CFD網格劃分

The biggest time savings can be achieved by using surface wrapping. With this method the base geometry is shrinked with a surface mesh.

2661 2 2

網格大師 ??? 2年前

帖子 abaqus中做的組合結構施加位移荷載的模型，總是出現錯誤怎么解決

The nodes along the tied surface perimeters have been added to the node set named "WarnNodePerimTieSeam".------------------------------------------------------------------------------

2597 1 1

Coincidence_0550 ??? 3年前

帖子 abaqus警告與報錯

together and use this surface instead.

4236

技術Z ??? 9月前

問答 Hypermesh+Abaqus接觸問題？

Surface assembly__pickedsurf15 has facets that are not oriented properly with respect to neigh boring facets. Use available post processor to visualize surface normals.

2824 1 2

墨紫寒 ??? 3年前

帖子 Cadence Fidelity? CFD 應該是 Numecan / OMNIS 改的！

Omnis/Open (DBS and PBS) – Surface-to-surface radiationThe surface-to-surface (S2S) radiation model has been introduced in the Omnis/Open density-based and coupled pressure-based solvers to account for

2702 3

蝰蛇設計 ??? 3年前

Cadence Fidelity? CFD 應該是 Numecan / OMNIS 改的！

問答

*** Warning 30131 (INI+131) total number of massless nodes = 21 slave surface of interface = 1 type = 4 surface

3042 1

明月照我程 ??? 2年前

問答關于abaqus綁定解除問題

slave surface assembly is node-based surface to surface，abaqus從屬曲面裝配是基于節點的曲面，用于面到面方法。為了通過這種方法提高應力精度，采用基于元素的應使用表面代替。，請問這種問題怎么解決呀

2377 2

小程序用戶_Ra6y2kNB ??? 1年前

帖子 Ansys Workbench網格控制之——全局網格控制

Use Post Smoothing使用Pose平滑，默認為Yes，用于提高網格質量。Smoothing lterations平滑處理，數值范圍1~20，默認為5。用于當Use Post Smoothing選擇Yes時，設置平滑迭代步數。

4969 11 2

Infiniteelements ??? 2年前

問答 ABAQUS中，金屬復合板建模，中間采用內聚力接觸方式，為何提交作業顯示錯誤？

Surface based COHESIVE BEHAVIOR cannot be used for contact pair interactions. See the surface interaction named INTPROP-CO.

2436 3 4

小程序用戶_B1S3jQMm ??? 2年前

帖子 Maxwell 中文幫助文檔_建模篇-01

Two-dimensional (2D) objects in the modeler include objects such as equation based surfaces , rectangles , ellipses , circles , and regular polygons .

3100 2 1

晴博 ??? 3年前