Check contact definitions for problems such as excessive initial overclosure or unrealistic tied definition between contact pairs.
The driven node 19 for part instance JOINT-ARRAY-2 does not belong to any element from the global model. Check coordinates, submodel exterior tolerance or absolute exterior tolerance.
Check the element connectivities for underlying elements 4041 instance part-1-1 and 1548398 instance part-1-1 (sharing the common edge whose end points are nodes 141 instance part-1-1 and 142 instance
Check the element connectivities for underlying elements 51221 instance fluid1-1 and 65798 instance fluid1-1 (sharing the common edge whose end points are nodes 49233 instance fluid1-1 and 49235 instance
The reference node 579 instance plan-1 on the *coupling option is not defined. The reference node 579 instance plan-1 on the *coupling option is not defined.
= value.data # 接觸應力值 # 獲取節點對象 node = value.instance.nodes[node_label - 1] # 獲取節點的變形后坐標 x, y, z = node.coordinates
***ERROR: Bad Material definition in element number 1 instance SOIL-1: zero or negative initial dilatational modulus caused by bad material data.
*Elset, elset=Set-1, instance=Part-1-1 1, 2, 5, 6*Elset, elset=_Surf-1_S4, internal, instance=Part-1-1, generate 2, 8, 2*Surface, type=ELEMENT, name=Surf-1_Surf-1_S4, S4*End Assembly
Resetting coefficient qm=1.0e-6.
使用fe-safe/verity進行焊接結構應力分析時，對焊接進行定義時，選取了Weld line nodes和Weld reference elements，點擊save and analyse進行保存和提交結構應力分析時，出現錯誤，發現所設置的焊接單元沒有與實例Instance關聯起來，log文件里有這樣一條警告信息："Item e... used in Weld Definition has
40 跳至頁
工程師必備
- 項目客服
- 培訓客服
- 平臺客服
TOP
