High Quality Meshing
關注創建者：FEA_Man 創建時間：2016-03-08
High Quality Meshing的實例教程
Omnis/Hexpress – Surface to volume meshing approach
Omnis/Hexpress extends its unstructured mesh generation tool set with the surface-to-volume module.
The surface-to-volume module allows generating 3D grids with high-quality surface meshes, aligned with the geometry and with smooth and thickness-controlled viscous layers when the geometry is clean and conformal.
Omnis/Autogrid - Meridional effects with autoblocking (beta)
Omnis/AutoGrid can now generate multi-block structured meshes of axisymmetric meridional effects (e.g. seal leakage, bleed or cavities) connected to the channel of the turbomachinery configuration.
Omnis/Turbo – Coarse grid simulation
The Omnis/Turbo simulation can run on a coarser grid level with the same mesh and simulation setup.
展開 
High Quality Meshing的相關專題、標簽、搜索
High Quality Meshingansys high設置Smart QualityMeshingHxGN Digital Quality Platformmeshing網格劃分 mesh qualitymesh quality差ls-dyna mesh qualityfluent meshing出錯the surface mesh quality is 1 which would lead to a failed volume meshone or more surfaces cannot be meshed with acceptable qualitymesh quality of some elements is not accepted by solver
High Quality Meshing的最新內容
Asurvey of high level frameworks in block-structured adaptive mesh refinementpackages[J]. Journal of Parallel & Distributed Computing, 2014,74(12):3217-3227.
)Reset All
Enhanced (Image Quality)
High (Image Quality)
Press new shortcut key:
Description:
Refresh the print preview page.
The best combination is light roasting, a high degree of dehydration, short soaking time, and high soaking temperature.
The best combination is light roasting, a high degree of dehydration, short soaking time, and high soaking temperature.
The best combination is light roasting, a high degree of dehydration, short soaking time, and high soaking temperature.
在Quality中，Smoothing選擇High。
（4）右鍵單擊模型樹中Mesh選項，選擇快捷菜單中的Generate Mesh選項，開始生成網格。
（5）網格劃分完成以后，單擊模型樹中Mesh項可以在圖形窗口中查看網格。
（6）執行主菜單File→Close Meshing命令，退出網格劃分界面，返回到Workbench主界面。
Medium用于結構、流體與電磁計算使用默認即可，High用于顯示動力學計算。
4 .5 Mesh Metric網格評估
網格劃分完成后，若要查看網格質量，只需選擇Mesh Metric右側對應的質量判據。顯示窗口下方將出現一張柱狀表，點擊對應的柱狀，可以在顯示窗口中看到對應的網格。Mesh Metric下方會出現最大數值最小數值等統計值。
（4）右鍵單擊模型樹中Mesh選項，依次選擇Mesh→Insert→Method，Method選擇Hex Domainant，Free Face Mesh Type選擇All Quad。
（5）網格參數設置，在Element Size中輸入2e-3，在Quality中，Smoothing選擇High。
Since no prismatic layers were used with the Harpoon mesh, yplus values were fairly high. Therefore, the mesh size should be decreased on the wheels.
Power inverters also exhibit high-frequency noise in the range of 10,000 Hz.
