ansys 時間位移圖的案例
在LS-DANA后處理中怎么得出位移-時間圖
請教： 我是做應力波在混凝土中傳播檢測其缺陷，不知道什么原因，我在LS-DANA后處理中提取不出來節點位移-時間圖，提取出來的位移-時間圖顯示位移是0，但是能夠提取出速度-時間圖和加速度-時間圖。 模型的命令流附下表
/prep7
et,1,plane162
mp,dens,1,2500
mp,ex,1,40e9
mp,nuxy,1,0.2
mp,ex,2,2e11
mp,dens,2,7800
mp,nuxy,2,0.3
RECTNG,0.028,0.23,0,0.028,
RECTNG,0.23,0.25,0,0.25,
RECTNG,0,0.23,0.028,0.15,
RECTNG,0,0.23,0.15,0.151,
RECTNG,0,0.23,0.151,0.152,
RECTNG,0,0.23,0.152,0.25,
FLST,3,1,8
FITEM,3,0,0,0
K, ,P51X
FLST,2,3,3
FITEM,2,25
FITEM,2,9
FITEM,2,4
A,P51X
CYL4,0,0,0.024,45, ,90
ASBA, 7, 8
NUMMRG,ALL, , , ,LOW
NUMCMP,ALL
FLST,5,15,4,ORDE,9
FITEM,5,1
FITEM,5,3
FITEM,5,-9
FITEM,5,11
FITEM,5,-12
FITEM,5,14
FITEM,5,17
FITEM,5,19
FITEM,5,-21
CM,_Y,LINE
LSEL, , , ,P51X
CM,_Y1,LINE
CMSEL,,_Y
!
展開 