abaqus怎么施加重力的案例
abaqus中uel單元如何施加重力
1000是最模型的高度
最后的結果比真實值小一半，求助大佬解疑
abaqus重力和體力該怎么加才會收斂
大佬們，可以請教一下單獨給部件加重力時，可以兩個方向加嗎，或者加體力時可以兩個方向嗎，為啥加上總不收斂呢，顯示無效的加載類型
abaqus中做的組合結構施加位移荷載的模型，總是出現錯誤怎么解決
status文件如下
-------------------------------------------------------------------------------
PREPROCESSOR WARNING MESSAGES
-------------------------------------------------------------------------------
***WARNING: There are 3 warning messages in the data (.dat) file. Please
check the data file for possible errors in the input file.
***WARNING: In step 1, portions of main surfaces in the general contact domain
have been tied together. Joining disconnected surfaces with *TIE
does not alter the surface connectivity and results in a seam in
the contact surface. The nodes along the tied surface perimeters
have been added to the node set named "WarnNodePerimTieSeam".
--------------------------------------------
展開 