關于abaqus計算不收斂的求助!!
本人在模擬一個鋼筋混凝土框架結構在豎向荷載及水平周期反復荷載作用時一直出現如下警告，然后計算一直不收斂。還望各位大神指點。模型在下方。
Whenever a translation (rotation) dof at a node is constrained by a kinematic coupling definition the translation (rotation) dofs for that node cannot be included in any other constraint including mpcs, rigid bodies, etc.
For *tie pair (assembly__pickedsurf966-assembly__pickedsurf965), adjusted nodes with very small adjustments were not printed. Specify *preprint,model=yes for complete printout.
For *tie pair (assembly__pickedsurf968-assembly__pickedsurf967), adjusted nodes with very small adjustments were not printed. Specify *preprint,model=yes for complete printout.
For *tie pair (assembly__pickedsurf970-assembly__pickedsurf969), adjusted nodes with very small adjustments were not printed. Specify *preprint,model=yes for complete printout.
For *tie pair (assembly__pickedsurf972-assembly__pickedsurf971), adjusted nodes with very small adjustments were not printed. Specify *preprint,model=yes for complete printout.
For *tie pair (assembly__pickedsurf976-assembly__pickedsurf975), adjusted nodes with very small adjustments were not printed. Specify *preprint,model=yes for complete printout.
For *tie pair (assembly__pickedsurf978-assembly__pickedsurf977), adjusted nodes with very small adjustments were not printed. Specify *preprint,model=yes for complete printout.
MPCS (EXTERNAL or INTERNAL, including those generated from rigid body definitions), KINEMATIC COUPLINGS, AND/OR EQUATIONS WILL ACTIVATE ADDITIONAL DEGREES OF FREEDOM
The plasticity/creep/connector friction algorithm did not converge at 6 points
The plasticity/creep/connector friction algorithm did not converge at 6 points
The plasticity/creep/connector friction algorithm did not converge at 2 points
The plasticity/creep/connector friction algorithm did not converge at 2 points
The plasticity/creep/connector friction algorithm did not converge at 2 points
The plasticity/creep/connector friction algorithm did not converge at 2 points
the plasticity/creep/connector friction algorithm did not converge at 2 points
The plasticity/creep/connector friction algorithm did not converge at 2 points
