ansys瞬態分析計算完成后顯示solution is done并且好好的，當進入后處理時就閃退了。

查看了error文件里面

 A reference force value times the tolerance is used by the              

 Newton-Raphson method for checking convergence.  The calculated         

 reference FORCE CONVERGENCE VALUE = 0 is less than a threshold.  This   

 threshold defaults to 1.0-2 or is specified as MINREF on the CNVTOL     

 command.  Check results carefully. 

yuanhui 13:12:25

 *** WARNING ***   SUPPRESSED MESSAGE    CP =      14.711   TIME= 12:00:40

 A reference force value times the tolerance is used by the              

 Newton-Raphson method for checking convergence.  The calculated         

 reference FORCE CONVERGENCE VALUE = 0 is less than a threshold.  This   

 threshold defaults to 1.0-2 or is specified as MINREF on the CNVTOL     

 command.  Check results carefully.                                      

 *** ERROR ***                           CP =    5956.570   TIME= 12:58:43

 An unexpected error ( SIG$SEGV ) has occurred...  ANSYS internal data   

 has been corrupted.  ANSYS is unable to recover and will terminate.     

 Previously saved files are unaffected.  Please send the data leading    

 to this operation to your technical support provider, as this will      

 allow ANSYS, Inc to improve the program.                                

只有最后一個error就是在進入/post26后出現的，其余都是warning。為什么計算收斂完成了還會出現這種情況呢？