ABAQUS問題？ 120
我用的是UMAT子程序，出現以下問題：
The executable standard.exe aborted with system error code 1073740940. Please check the .dat, .msg, and .sta files for error messages if the files exist. If there are no error messages and you cannot resolve the problem, please run the command "abaqus job=support information=support" to report and save your system information. Use the same command to run Abaqus that you used when the problem occurred. Please contact your local Abaqus support office and send them the input file, the file support.log which you just created, the executable name, and the error code.
這是dat文檔中的內容：
1
Abaqus 6.14-1 Date 19-一月-2018 Time 10:56:46
For use by Supplied By SSQ under license from Dassault Systemes or its subsidiary.
The Abaqus Software is a product of:
Dassault Systemes Simulia Corp.
Rising Sun Mills
166 Valley Street
Providence, RI 02909-2499, USA
The Abaqus Software is available only under license
from Dassault Systemes or its subsidiary and may be
used or reproduced only in accordance with the terms
of such license.
On machine Shisy
you are authorized to run
Abaqus/Standard until 31-Dec-2055
Your site id is:
For assistance or any other information you may
obtain contact information for your local office
from the world wide web at:
http://www.3ds.com/products/simulia/locations/
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* *
* ***************** *
* * N O T I C E * *
* ***************** *
* *
* *
* Abaqus 6.14-1 *
* *
* BUILD ID: 2014_06_05-06.11.02 134264 *
* *
* *
* Please make sure you are using release 6.14 manuals *
* plus the notes accompanying this release. *
* *
* *
* *
* *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
PROCESSING PART, INSTANCE, AND ASSEMBLY INFORMATION
*******************************************************
END PROCESSING PART, INSTANCE, AND ASSEMBLY INFORMATION
***********************************************************
OPTIONS BEING PROCESSED
***************************
*Heading
*Node
*Element, type=C3D8R
*Nset, nset=ASSEMBLY_PART-1-1_SET-1
*Nset, nset=ASSEMBLY_PART-1-1_SET-3
*Elset, elset=ASSEMBLY_PART-1-1_SET-1
*Elset, elset=ASSEMBLY_PART-1-1_SET-3
*Node
*Nset, nset=ASSEMBLY_M_SET-1
*Nset, nset=ASSEMBLY_SET-2
*Nset, nset=ASSEMBLY_SET-3
*Elset, elset=ASSEMBLY_SET-2
*Elset, elset=ASSEMBLY__S_SURF-1_S3
*surface, type=ELEMENT, name=ASSEMBLY_S_SURF-1
*surface, type=ELEMENT, name=ASSEMBLY_S_SURF-1
*coupling, constraintname=ASSEMBLY_CONSTRAINT-1, refnode=ASSEMBLY_M_SET-1, surface=ASSEMBLY_S_SURF-1
*coupling, constraintname=ASSEMBLY_CONSTRAINT-1, refnode=ASSEMBLY_M_SET-1, surface=ASSEMBLY_S_SURF-1
*coupling, constraintname=ASSEMBLY_CONSTRAINT-1, refnode=ASSEMBLY_M_SET-1, surface=ASSEMBLY_S_SURF-1
*kinematic
***WARNING: WHENEVER A TRANSLATION (ROTATION) DOF AT A NODE IS CONSTRAINED BY
A KINEMATIC COUPLING DEFINITION THE TRANSLATION (ROTATION) DOFS
FOR THAT NODE CANNOT BE INCLUDED IN ANY OTHER CONSTRAINT INCLUDING
MPCS, RIGID BODIES, ETC.
*coupling, constraintname=ASSEMBLY_CONSTRAINT-1, refnode=ASSEMBLY_M_SET-1, surface=ASSEMBLY_S_SURF-1
*material, name=ZICHENGXU
*depvar
*usermaterial, constants=88
*material, name=ZIDAI
*density
*elastic
*concretedamagedplasticity
*concretecompressionhardening
*concretetensionstiffening
*solidsection, elset=ASSEMBLY_PART-1-1_SET-3, controls=EC-1, material=ZICHENGXU
*sectioncontrols, name=EC-1, hourglass=ENHANCED
***WARNING: THE PARAMETER HOURGLASS = ENHANCED ON THE SECTION CONTROLS OPTION
IS RELEVANT FOR THESE ELEMENTS: C3D8R, CAX4R, CGAX4R, CPEG4R,
CPE4R, CPS4R, M3D4R, S4R, SC8R AND THEIR HYBRID, THERMAL AND
PRESSURE COUNTERPARTS WHEREVER APPLICABLE. IT IS ALSO RELEVANT FOR
ALL TYPES OF MODIFIED TRIANGULAR AND TETRAHEDRAL ELEMENTS. THIS
WARNING CAN BE IGNORED IF THE FEATURE IS APPLIED TO THESE ELEMENT
TYPES ONLY.
*boundary
*boundary
*solidsection, elset=ASSEMBLY_PART-1-1_SET-3, controls=EC-1, material=ZICHENGXU
*surface, type=ELEMENT, name=ASSEMBLY_S_SURF-1
*output, field, variable=PRESELECT
*output, history, variable=PRESELECT
*output, field, variable=PRESELECT
*output, history, variable=PRESELECT
*output, field, variable=PRESELECT
*output, history, variable=PRESELECT
***WARNING: MPCS (EXTERNAL or INTERNAL, including those generated from rigid
body definitions), KINEMATIC COUPLINGS, AND/OR EQUATIONS WILL
ACTIVATE ADDITIONAL DEGREES OF FREEDOM
*amplitude, name=AMP-1
*Step, name=Step-1, nlgeom=NO, inc=10000
*output, field, variable=PRESELECT
*output, history, variable=PRESELECT
*Step, name=Step-1, nlgeom=NO, inc=10000
*Step, name=Step-1, nlgeom=NO, inc=10000
*static
*boundary
*boundary
*output, field, variable=PRESELECT
*output, history, variable=PRESELECT
*endstep
*Step, name=Step-1, nlgeom=NO, inc=10000
*static
*boundary
*boundary
*endstep
P R O B L E M S I Z E
NUMBER OF ELEMENTS IS 90
NUMBER OF NODES IS 177
NUMBER OF NODES DEFINED BY THE USER 177
TOTAL NUMBER OF VARIABLES IN THE MODEL 582
(DEGREES OF FREEDOM PLUS MAX NO. OF ANY LAGRANGE MULTIPLIER
VARIABLES. INCLUDE *PRINT,SOLVE=YES TO GET THE ACTUAL NUMBER.)
END OF USER INPUT PROCESSING
JOB TIME SUMMARY
USER TIME (SEC) = 0.40000
SYSTEM TIME (SEC) = 0.20000
TOTAL CPU TIME (SEC) = 0.60000
WALLCLOCK TIME (SEC) = 5
1
Abaqus 6.14-1 Date 19-一月-2018 Time 10:56:56
For use by Supplied By SSQ under license from Dassault Systemes or its subsidiary.
STEP 1 INCREMENT 1
TIME COMPLETED IN THIS STEP 0.00
S T E P 1 S T A T I C A N A L Y S I S
AUTOMATIC TIME CONTROL WITH -
A SUGGESTED INITIAL TIME INCREMENT OF 2.000E-02
AND A TOTAL TIME PERIOD OF 1.000E+03
THE MINIMUM TIME INCREMENT ALLOWED IS 1.000E-05
THE MAXIMUM TIME INCREMENT ALLOWED IS 1.00
LINEAR EQUATION SOLVER TYPE DIRECT SPARSE
UNSYMMETRIC MATRIX STORAGE AND SOLUTION WILL BE USED
msg文檔和log文檔見附件！
