數據檢查中警告內容：

從表面ASSEMBLY_ CP-1-PART-TCXC-S-1和ASSEMBLY_。它們與同樣彼此相交的主表面ASSEMBLY_CP-1-PART-FDTT1-S-1和ASSEMBLY_CP_2-PART-fdtt-S-1配對。如果兩對都是*接觸對，則這兩對不應在一個步驟中同時存在，因為可能存在收斂問題；使用*MODEL CHANGE，TYPE=觸點對移除其中一個。如果兩者都是*扎帶對，多余的扎帶將自動移除。如果一對是領帶，另一對是接觸線，請取下其中一對。

THE SLAVE SURFACES ASSEMBLY_CP-1-PART-TCXC-S-1 AND ASSEMBLY_CP-2-PART-TCXC-S-1 INTERSECT EACH OTHER. THEY ARE PAIRED WITH MASTER SURFACES ASSEMBLY_CP-1-PART-FDTT1-S-1 AND ASSEMBLY_CP-2-PART-FDTT1-S-1 THAT ALSO INTERSECT EACH OTHER. IF BOTH PAIRS ARE *CONTACT PAIRs, THESE TWO PAIRS SHOULD NOT BE SIMULTANEOUSLY PRESENT IN A STEP BECAUSE OF POSSIBLE CONVERGENCE PROBLEMS; USE *MODEL CHANGE,TYPE=CONTACT PAIR TO REMOVE ONE OF THEM. IF BOTH ARE *TIE PAIRS, THE REDUNDANT TIES WILL BE REMOVED AUTOMATICALLY. IF ONE PAIR IS *TIE AND ANOTHER IS *CONTACT PAIR, REMOVE ONE OF THEM.

最終會導致接觸不收斂，這樣的問題如何解決？請各位大佬賜教，謝謝！