有沒(méi)有大佬知道這個(gè)問(wèn)題怎么解決有償？
Abaqus/Standard Analysis exited with an error - Please see the message file for possible error messages if the file exists.
1
Abaqus 3DEXPERIENCE R2019x Date 30-6月-2023 Time 11:56:01
For use by Supplied by Team-SolidSQUAD under license from Dassault Systemes or its subsidiary.
STEP 1 INCREMENT 1 STEP TIME 0.00
S T E P 1 D Y N A M I C A N A L Y S I S - I M P L I C I T I N T E G R A T I O N
DYNAMIC APPLICATION PACKED SCHEME IS TRANSIENT FIDELITY
HILBER-HUGHES-TAYLOR (HHT) TIME INTEGRATOR IS USED
AUTOMATIC TIME CONTROL WITH -
A SUGGESTED INITIAL TIME INCREMENT OF 1.000E-02
AND A TOTAL TIME PERIOD OF 3.00
THE MINIMUM TIME INCREMENT ALLOWED IS 1.000E-08
THE MAXIMUM TIME INCREMENT ALLOWED IS 3.000E-02
SCALE FACTOR ON TIME AVERAGE FORCE FOR HALF-
-INCREMENT RESIDUAL COMPUTATIONS IS 1.000E+03
HILBER-HUGHES-TAYLOR METHOD PARAMETERS: ALPHA IS -5.000000E-02
BETA IS 0.275625
GAMMA IS 0.550000
SINGULAR MASS TREATMENT TYPE IS ERROR
CONSERVATIVE TIME INCREMENTATION IS USED
STEP AMPLITUDE IS STEP
CONVERGENCE TOLERANCE PARAMETERS FOR FORCE
CRITERION FOR RESIDUAL FORCE FOR A NONLINEAR PROBLEM 5.000E-03
CRITERION FOR DISP. CORRECTION IN A NONLINEAR PROBLEM 1.000E-02
INITIAL VALUE OF TIME AVERAGE FORCE 1.000E-02
AVERAGE FORCE IS TIME AVERAGE FORCE
ALTERNATE CRIT. FOR RESIDUAL FORCE FOR A NONLINEAR PROBLEM 2.000E-02
CRITERION FOR ZERO FORCE RELATIVE TO TIME AVRG. FORCE 1.000E-05
CRITERION FOR RESIDUAL FORCE WHEN THERE IS ZERO FLUX 1.000E-05
CRITERION FOR DISP. CORRECTION WHEN THERE IS ZERO FLUX 1.000E-03
CRITERION FOR RESIDUAL FORCE FOR A LINEAR INCREMENT 1.000E-08
FIELD CONVERSION RATIO 1.00
CRITERION FOR ZERO FORCE REL. TO TIME AVRG. MAX. FORCE 1.000E-05
CRITERION FOR ZERO DISP. RELATIVE TO CHARACTERISTIC LENGTH 1.000E-08
CONVERGENCE TOLERANCE PARAMETERS FOR MOMENT
CRITERION FOR RESIDUAL MOMENT FOR A NONLINEAR PROBLEM 5.000E-03
CRITERION FOR ROTATION CORRECTION IN A NONLINEAR PROBLEM 1.000E-02
INITIAL VALUE OF TIME AVERAGE MOMENT 1.000E-02
AVERAGE MOMENT IS TIME AVERAGE MOMENT
ALTERNATE CRIT. FOR RESIDUAL MOMENT FOR A NONLINEAR PROBLEM 2.000E-02
CRITERION FOR ZERO MOMENT RELATIVE TO TIME AVRG. MOMENT 1.000E-05
CRITERION FOR RESIDUAL MOMENT WHEN THERE IS ZERO FLUX 1.000E-05
CRITERION FOR ROTATION CORRECTION WHEN THERE IS ZERO FLUX 1.000E-03
CRITERION FOR RESIDUAL MOMENT FOR A LINEAR INCREMENT 1.000E-08
FIELD CONVERSION RATIO 1.00
CRITERION FOR ZERO MOMENT REL. TO TIME AVRG. MAX. MOMENT 1.000E-05
VOLUMETRIC STRAIN COMPATIBILITY TOLERANCE FOR HYBRID SOLIDS 1.000E-05
AXIAL STRAIN COMPATIBILITY TOLERANCE FOR HYBRID BEAMS 1.000E-05
TRANS. SHEAR STRAIN COMPATIBILITY TOLERANCE FOR HYBRID BEAMS 1.000E-05
SOFT CONTACT CONSTRAINT COMPATIBILITY TOLERANCE FOR P>P0 5.000E-03
SOFT CONTACT CONSTRAINT COMPATIBILITY TOLERANCE FOR P=0.0 0.100
CONTACT FORCE ERROR TOLERANCE FOR CONVERT SDI=YES 1.00
DISPLACEMENT COMPATIBILITY TOLERANCE FOR DCOUP ELEMENTS 1.000E-05
ROTATION COMPATIBILITY TOLERANCE FOR DCOUP ELEMENTS 1.000E-05
