- 技術鄰?>?
- CAE仿真?>?
- Abaqus ,
- 工業軟件開發
abaqus python批量計算顯示ABAQUS/Standard rank 0 failed？ 10
瀏覽：5653 回答：3
批量40左右個模型用python循環接續計算，完成前半十幾二十個模型的計算后剩下的模型都能建模但是無法計算，每新建一個模型就顯示ABAQUS/Standard rank 0 failed to allocate memory錯誤沒有計算直接跳到下一個模型，任務管理器發現內存飆到90幾，但是硬盤空間還有很多，請教各位如何解決
我的任務循環函數如下：
def jobsubmit(job_name, model_name): mdb.Job(name=job_name, model=model_name, description='', type=ANALYSIS, atTime=None, waitMinutes=0, waitHours=0, queue=None, memory=90, memoryUnits=PERCENTAGE, getMemoryFromAnalysis=False, explicitPrecision=SINGLE, nodalOutputPrecision=SINGLE, echoPrint=OFF, modelPrint=OFF, contactPrint=OFF, historyPrint=OFF, userSubroutine='', scratch='', resultsFormat=ODB, multiprocessingMode=DEFAULT, numCpus=8, numDomains=8, numGPUs=0) mdb.jobs[job_name].submit(consistencyChecking=OFF)#提交作業進行計算 mdb.jobs[job_name].waitForCompletion()
剛開始前二十個模型都能順利完成建模與計算，但是到后面在某一個模型建立的log文件出現如下的報錯信息：（然后從這個模型開始后面接續的模型都是只建模出來而沒有投入計算）
Analysis initiated from SIMULIA established products Abaqus JOB Job27-32 Abaqus 2020 Abaqus License Manager checked out the following licenses: Abaqus/Standard checked out 12 tokens from Flexnet server localhost. <1012 out of 1024 licenses remain available>. Begin Analysis Input File Processor 2022/1/11 8:14:53 Run pre.exe 2022/1/11 8:15:14 End Analysis Input File Processor Begin Abaqus/Standard Analysis 2022/1/11 8:15:14 Run standard.exe *** Error:ABAQUS/Standard rank 0 failed to allocate memory *** ERROR CATEGORY: SOLVER 2022/1/11 8:16:29 Abaqus Error: Abaqus/Standard Analysis exited with an error - Please see the message file for possible error messages if the file exists. Begin SIM Wrap-up 2022/1/11 8:16:29 Run SMASimUtility.exe 2022/1/11 8:16:29 End SIM Wrap-up Abaqus/Analysis exited with errors
