Abaqus提交分析直接aborted，顯示錯誤如下？ 10

瀏覽：3014 回答：3

在做巖土工程實例詳解（費康）中的懸掛防水墻防滲效果出現的問題

ELEMENT OUTPUT ON EXTERIOR ELEMENTS HAS BEEN SPECIFIED. HOWEVER, THERE ARE NO ELEMENTS IN THE MODEL FOR WHICH THIS TYPE OF OUTPUT IS SUPPORTED. ELEMENT OUTPUT ON EXTERIOR ELEMENTS IS SUPPORTED ONLY FOR 3-D CONTINUUM ELEMENTS AND SHELL AND MEMBRANE ELEMENTS, EXCEPT AXISYMMETRIC SHELLS AND MEMBRANES.

邀請回答我來回答

全部回答

(3)

默認 最新

元來是你

單元輸出改為默認設置。

2020年6月20日

評論點贊

北望逸塵

單元類型與輸出不匹配

2020年6月14日

評論點贊

有限元與近場動力學

定義單元有問題

2020年6月13日

評論點贊

沒解決？試試專家一對一服務

換一批

相似問題

查看全部

simufact.welding 中出現 aborted with exit 1009，請老師指教？ 1個回答
9999 1009 Error encountered in stress recovery. The output will reveal which element has a particular problem. The error is usually due to excessive deformation in the element. Note that this can occu
ABAQUS新手急需幫助 1個回答
4508 elements are distorted. Either the isoparametric angles are out of the suggested limits or the triangular or tetrahedral quality measure is bad. The elements have been identified in element set W
ABAQUS問題？ 4個回答
我用的是UMAT子程序，出現以下問題： The executable standard.exe aborted with system error code 1073740940. Please check the .dat, .msg, and .sta files for error messages if the files exist. If there are no error mess