Dyna做跌落模擬計算報錯，請大神們幫忙解答一下？ 20
瀏覽：4285 回答：5
Error 30059 (INI+59)
cannot find element of slave segment 49 of interface 2
Message 30059 (INI+59) exceeds 50 times
Further printing will be suppressed from screen only
You can change the limit (MSGMAX) at field 4 of card 2 of *CONTROL_OUTPUT
*** Error 30025 (INI+25)
massless node 2331572 on the master side of surface 6 type 3
This could be lead to a segment with no parent element defined.
The LS-DYNA time step size should not exceed 1.097E-05
to avoid contact instabilities. If the step size is
bigger then scale the penalty of the offending surface.
我也遇到同樣問題，lsrun計算是報錯，回hm里面找不到問題節點，排查原因是網格尺寸太小，將網格尺寸調整后OK。