老師你的聯系方式有嗎？

為什么這個腔點選擇 不了

這個模型只有在0.2Mpa氣壓下才能正確運行

Slave surface assembly_rubber-1_shang_cns_ is a node-based surface used with surface to surface approach. In order to obtain improved stress accuracy with this approach, an element-based surface should be used instead. For *tie pair (assembly_rubber-1_shang_cns_-assembly_gaiban-1_shang_cns_), not all the nodes that have been adjusted were printed. Specify *preprint,model=yes for complete printout. Slave surface assembly_rubber-1_xia_cns_ is a node-based surface used with surface to surface approach. In order to obtain improved stress accuracy with this approach, an element-based surface should be used instead. For *tie pair (assembly_rubber-1_xia_cns_-assembly_huosai-1_xia_cns_), not all the nodes that have been adjusted were printed. Specify *preprint,model=yes for complete printout. The surface assembly_rubber-1_nei is not completely enclosed. A list of element with free edges on this surface is given as follows: Boundary conditions are specified on inactive dof of 1294 nodes. The nodes have been identified in node set WarnNodeBCInactiveDof. The strains are so large that the program will not attempt the hyperelasticity calculation at 6 points

有結果的圖嗎

請問里面有剛度強度頻率的分析嗎

可以的。