
注冊
/
登錄Warning 30028 (INI+28) Number of tied node messages for surface 6 = 144 Message 40552 (SOL+552) exceeds 50 times Further printing will be suppressed from screen only
LSDYNA計算侵徹時報warning 40487,最小應力什么的,計算可以正常進行,但是求解所需時間大幅增加,可能是什么問題?(之前求解另一個模型時沒有報warning,再換了另一個模型后出現問題,感覺跟模型網格關系不大。不報warning時大概10小時左右計算結束,出現問題以后增加到50小時才能計算結束)
Ls-dyna 求解過程中出現Warning 40123 (SOL+123)對結果有影響嗎?
*** Warning 70025 (OTH+25) (processor # 0) Memory is set 18768520 words short increase the memory size to 98716124 *** Warning 70025 (OTH+25) (processor # 0)
warning or by adding *diagnostics, nonhybrid=warning to the input file (not recommended).
請問這是什么警告,對計算有什么影響嗎,應該如何解決呢
6569788 words short increase the memory size to 438906200 *** Warning 11199 (KEY+1199) DCT should be -1 in *CONTROL_ALE *** Warning 10989 (KEY+989) AFAC not equal to
如標題,沒有錯誤和警告的信息實在不知道該從哪里開始檢查。后來發現電腦容量剛好不夠了,這是否可能是因為電腦容量不足導致的?
5239046 words short increase the memory size to 352648200 *** Warning 11199 (KEY+1199) DCT should be -1 in *CONTROL_ALE *** Warning 10989 (KEY+989) AFAC not equal to
some facet thicknesses for general contact were reduced from the parent element or specified values due to a large thickness compared to fac
空氣炸藥地面的流固耦合地面用的關鍵字 run一會就出現這個 有的時候就停止計算了請問會是哪里出現問題呀
做rve ,報錯error07,節點都對應了,但是報錯”Warning: The element set "lefts" was not imported. Warning: The element set "rights" was not imported. Warning:
有大佬知道這個警告出現的原因及如何解決該問題。
Beginning of keyword reader 07/06/22 15:15:11 *** Warning 11199 (KEY+1199) DCT should be -1 in *CONTROL_ALE *** Warning 10302 (KEY+302) CHECKING
在進行鋼軌柔性體替換后出現這個錯誤。是什么原因引起的呢
如圖中案例,預計實際為2.5小時,實際時間為6小時。
跳至頁
TOP