請看聯結
內容有
· (2007/01/25) (1/2) 結構非線性分析專輯(1): 滑脫(Snap-Throug),卡進(Snap-Fit, Snap-In)及拔松(Pulling-Out)觀念介紹
· (2007/01/25) (2/2) 結構非線性分析專輯(2): 破裂(Rupture)觀念介紹
· (2007/02/27) 結構非線性分析專輯(3): 滑脫現象(Snap-Throug Phenomena)之簡介與分析之參數設定
· (2007/05/27) 結構非線性分析專輯(4): 破裂(Ruptur)之簡介與分析之參數設定
· (2007/07/25) 流固耦合FSI專輯(1): 避震器流固耦合FSI分析
· (2007/08/31) 自由六面體網格建立(動畫)
1. Import CAD model (gif)
2. Define material model (gif)
3. Define element group (gif)
4. Define overall mesh density (gif)
5. Test and simulate the free hex meshing (gif)
6. Peform the free hex meshing (gif)
7. Delete the mesh, if you don't like it (gif)
8. Define local mesh density (gif)
9. Test and simulate the free hex meshing again (gif)
10. Peform the free hex meshing again (gif)
11. Save database (gif)
12. Display and check geometry (gif)
13. Display and check mesh (gif)
14. Display and check with zone (gif)
· (2007/10/02) 用NASTRAN網格輸入作FSI分析
· (2007/11/13) 非線性擬動態分析(Low Speed Dynamics)簡介
· (2008/01/08) 線性靜態應力分析求解及基本后處理(動畫)
1. Setting up solution control (gif)
2. Applying Boundary Conditions (gif)
3. Applying Loading (gif)
4. Solve the model (gif)
5. Load the result database (.por) and plot a quick equivalent stress band (gif)
6. Define ZONE on local area and plot the stress band on it (gif)
7. Change the stress component/item to plot, and clear the band (gif)
8. Save the post-processing database (.pdb) (gif)