LSDYNA常見錯誤與解決辦法
瀏覽：3568 評論：1
*** Error 20216 (STR+216)
part # 6 is out-of-range
>>>>> Process 0 <<<<<
>>>>> Signal 11 : Segmentation Violation <<<<<
計算模態時出現的錯誤問題
===================================================================================
= BAD TERMINATION OF ONE OF YOUR APPLICATION PROCESSES
= PID 54585 RUNNING AT i5611
= EXIT CODE: 9
= CLEANING UP REMAINING PROCESSES
= YOU CAN IGNORE THE BELOW CLEANUP MESSAGES
===================================================================================
錯誤位置無法找到。是因為模型中定義的接觸非線性？不至于，因為材料非線性？有可能，怎么辦？
正確的輸出：
Solving eigenproblem with MPP Lanczos - Global order = 5794551
3 t 1.0000E-05 dt 1.00E-05 write d3eigv file 03/18/25 16:40:10
esolvr_mpp : mxblksize 8
eigenextraction completed
number of eigenvalues found : 10
number of eigenvalues discarded: 0
xdseex warning return : 0
xdseex error return : 0
time for eigenextraction : 9.2645E+01
3 t 1.0000E-05 dt 1.00E-05 write eigout file 03/18/25 16:42:53
N o r m a l t e r m i n a t i o n 03/18/25 16:42:53
material type 100
that is invalid for belytschko-schwer beam elements
錯誤：傳統梁單元不能用MAT100
錯誤：關閉AUTOSPC
*CONTROL_IMPLICIT_SOLVER
$ lsolvr lprint negeig order drill dparm autospc aspctl
14 1 0 0 0 0 2 0
?
*** Error 60047 (IMP+47)
*********************************************************
* *
* - FATAL ERROR - *
* AUTOSPC detected very large entries in the *
* assembled matrix. These are probably caused *
* by overflow during elemental matrix computations. *
* This could be caused by an energy explosion. *
* Recommend switching to the REAL*8 version of LS-DYNA.*
* *
*********************************************************
*** Error 10267 (KEY+267)
in converting external to internal
單元沒有節點，看看是不是在別的INCLUDE文件中。
遞進式模型調試的必要性！
隱式分析中遇到的問題，如何應對？
*** Warning 60123 (IMP+123)
**************************************************
* - WARNING - *
* 207 negative eigenvalues detected during *
* factorization of linear equation system. *
* *
* Errors during stiffness matrix inversion are *
* often caused by one of the following problems: *
* *
* 1) Invalid material properties (negative *
* Young's Modulus, zero yield stress...) *
* 2) Inverted element from severe distortion. *
* 3) Rigid Body Modes. Generally, three nodes *
* must be constrained in static analysis. *
* *
* See the User's Manual for more information. *
* *
**************************************************
*** Warning 60058 (IMP+58)
At least one small pivot detected during factorization.
First node: 2266376 dof: Ma
*** Error 11003 (KEY+1003)
Contact definition 1000200 ID 1000200 is a TIED_SHELL_EDGE_TO_SURFACE_(OPTION) type
and cannot use segment set for the slave side
記得之前也遇到過：
rcmd: socket: Permission denied，不清楚為什么。
如果不去嘗試建立正確的剛度模型，那么動力學模型的精度還能保證嗎？關鍵的接觸關系還可靠嗎？
復合材料的建模、材料模型、失效模擬
技術鄰APP
工程師必備
工程師必備
- 項目客服
- 培訓客服
- 平臺客服
TOP
1
1
