1 引言

HYRCAN Version 1.75.2 (Released at 11/14/2021) 出來了，有需要的同學可以去下載。這個版本主要改正了以前版本的一個bug, 即不能導入從SLIDE輸出的dxf文件。以前的解決方案是用AutoCAD讀入SLIDE導出的dxf文件，然后不做任何改動重新保存一下就解決問題了，這個解決方案在AutoCAD 2022下保存為AutoCAD 2018 dxf格式測試通過。新的版本已經改正了這個bug, 可以直接導入SLIDE的dxf。導入的對象包括外部邊界，材料邊界，水位和支護。

當輸入后能夠自動產生出JS文件:

newmodel()

set("unit","metric","waterUW",9.81)extboundary(-2.661,5.214,15.836,5.214,15.836,8.2202,15.836,10.2151,15.836,14.3169,15.836,15.653,8.066,15.653,5.31334,13.4797,4.089,12.513,-2.609,12.513,-2.62042,10.9107,-2.64597,7.32346,-2.661,5.214)

matboundary(5.31334,13.4797,15.836,14.3169)

matboundary(-2.62042,10.9107,15.836,10.2151)

matboundary(-2.64597,7.32346,15.836,8.2202)    addsupport("single","id",1,"matid",1,"orientation","anglefromhoriz","angle",326.878,"length",5.02695,"atpoint",6.38889,14.3289)    addsupport("single","id",1,"matid",1,"orientation","anglefromhoriz","angle",325.748,"length",5.85361,"atpoint",4.95361,13.1956)    addsupport("single","id",1,"matid",1,"orientation","anglefromhoriz","angle",327.396,"length",5.72753,"atpoint",7.50003,15.2061)

addwatertable(-2.63431,8.96041,1.656,9.251,6.475,9.632,10.599,11.582,13.1769,15.653)