BAQUS中，不收斂提示了如下的錯誤：

THE SLAVE SURFACES INTERSECT EACH OTHER. THEY ARE PAIRED WITH MASTER SURFACES 。THAT ALSO INTERSECT EACH OTHER. IF BOTH PAIRS ARE *CONTACT PAIRs, THESE TWO PAIRS SHOULD NOT BE SIMULTANEOUSLY PRESENT IN A STEP BECAUSE OF POSSIBLE CONVERGENCE PROBLEMS; USE *MODEL CHANGE,TYPE=CONTACT PAIR TO REMOVE ONE OF THEM. IF BOTH ARE *TIE PAIRS, THE REDUNDANT TIES WILL BE REMOVED AUTOMATICALLY. IF ONE PAIR IS *TIE AND ANOTHER IS *CONTACT PAIR, REMOVE ONE OF THEM.

從表面彼此相互交叉。 它們與主表面配對。它們也相互交叉。 如果兩個配對都是接觸對，這兩個接觸對不應同時存在，因為可能出現的收斂問題; 使用*模型更改，類型=接觸對以刪除其中一個。 如果兩者都是* TIE配對，則冗余配件將自動拆除。 如果一對是*綁定而另一對是*聯系對，刪除其中一個。

如何解決