mimics3D建模后導入ansys的過程中出現“triangle element 8912 has an angle between adjacent edges of 169.5 degrees, which exceeds the warning limit of 165 degrees" "triangle element 8912 has an aspect of 39.08, which exceeds the warning limit of 20".模型導入后可以見到3維圖像， 但出現”unreasonably sheaped area" ,不能進行操作，ansys卡住，只能退出    為了解決這一問題我用mimics劃分網格后再導進ansys時又出現“shape testing revealed that 22 of the 237 new or modified elements violate shape warning limits . to review test results, please see the output file or issue the check mand. ” 網格文件不能導入。這是怎么回事，如何解決