我在PRoE中建模，保存成x_t文件，導入Adams時，彈出如下錯誤提示：

ERROR:   The reference marker of an extrusion, revolution, or shell must
belong to the same part as the extrusion, revolution, or shell.
ERROR:   The reference marker of an extrusion, revolution, or shell must
belong to the same part as the extrusion, revolution, or shell.

我以為是我在PorE中建模存在錯誤，重新試了兩次，結果兩次都有不同的構件無法定義質量參數，求大神指教。