The initial bulk modulus of 20000. Exceeds 100 times the initial shear modulus of 0.81060 (the initial poisson ratio 0.49998 exceeds 0.495) for the hyperelastic material named xj. However, a hybrid type element is not used. This may cause convergence problems. It is recommended that you change the element type to a hybrid element; however you can also convert this error message to a warning message by setting the environment variable nonhybrid_incompress to warning or by adding *diagnostics, nonhybrid=warning to the input file (not recommended).

初始體積彈性模量為20000.對于名為xj的超彈性材料，其初始剪切模量為0.81060（初始泊松比0.49998，超過0.495）的100倍。 然而，不使用混合型元件。 這可能會導致收斂問題。 建議您將元素類型更改為混合元素; 但是您也可以通過將環境變量nonhybrid_incompress設置為警告或將* diagnostics，nonhybrid = warning添加到輸入文件（不推薦）來將此錯誤消息轉換為警告消息。

有大神知道這個通過將環境變量nonhybrid_incompress設置為警告或將* diagnostics，nonhybrid = warning添加到輸入文件（不推薦）來將此錯誤消息轉換為警告消息在哪改嗎