我要把殘余應力分布加載到模型上，按照ABAQUS有限元分析常見問題解答，將我的模型做了修改，關鍵字如下"

*Initial Conditions, type=STRESS, input=WRS. dat

提交之后，報錯提示如下：

***ERROR: in keyword *INITIALCONDITIONS, file 

           "Q690_weld_tension_double_f0_1.inp", line 23136: Invalid instance id 

           "PART-1-1.11.55E+053.90E+061.03E+05-1.05E+05-7.06E+03-4.15E+04"

 ***NOTE: DUE TO AN INPUT ERROR THE ANALYSIS PRE-PROCESSOR HAS BEEN UNABLE TO 

          INTERPRET SOME DATA.  SUBSEQUENT ERRORS MAY BE CAUSED BY THIS OMISSION

 ***ERROR: AN INITIAL CONDITION HAS BEEN SPECIFIED ON ELEMENT 0 BUT THIS 

           ELEMENT HAS NOT BEEN DEFINED

inp文件以及dat文件因格式問題無法上傳，需要的話請與我聯系！

謝謝大神