The unconverged solution (identified as Substep 999999) is output for analysis debug purposes. Results at this time should not be used for any other purpose. Large deformation effects are active which may have invalidated some of your applied supports such as displacement, cylindrical, frictionless, or compression only. Refer to Troubleshooting in the Help System for more details. 哈哈，太過分了。我設置的是八分之一半球模擬整球，加的對稱和無摩擦約束，施加外表面壓力，施加初始缺陷非線性分析出現問題。懷疑是不是約束加錯了

有沒有發現截圖根本看不清。